EN
RU
FIBladder Type Accumulators
Bladder Type Accumulators - H Series
Technical Data:
- Maximum working pressure (PS): 250-210 bar
- Test Pressure (PT): PS x 1,43 / 1,3 / 1,5
- Body: made in painted carbon steel
- Standard nitrogen valve : ⅝” UNF (R version)
- Working temperature (TS): -20°C ÷ +80°C
- Standard bladder: can be used with mineral
- Outside epoxy painted as per standard FOX procedure or as project specification
- Bladders in HNBR, EPDM, FPM, HYTREL
- Connection with flange SAE 3000 – SAE 6000
- Connection with flange ANSI B16.5 or UNI/DIN
- Special connection on request
- H…/LT series for temperature up to – 40°C
- H…R series rechargeable with nitrogen valve 5/8” UNF
- H…M series rechargeable with nitrogen valve M28x1.5
- H…V series not rechargeable with fix nitrogen value
- Version 310 bar
Product Codes of H Accumulators:
| Code | Volume (Lt.) | Max. Pressure (bar) | Max. Flow (L/min.) | Gas Connection | Diameter (mm.) | Height (mm.) | Weight (kg.) |
|---|---|---|---|---|---|---|---|
| H120R | 0.12 | 250 | 35 | 5/8" UNF | 50 | 145 | 1.0 |
| H150R | 0.15 | 250 | 40 | 5/8" UNF | 70 | 135 | 1.7 |
| H350R | 0.35 | 250 | 35 | 5/8" UNF | 70 | 190 | 2.5 |
| H500R | 0.45 | 250 | 50 | 5/8" UNF | 92 | 167 | 2.8 |
| H700R | 0.7 | 250 | 40 | 5/8" UNF | 92 | 220 | 3.2 |
| H990R | 0.99 | 250 | 40 | 5/8" UNF | 92 | 251 | 3.9 |
| H1000R | 1 | 250 | 50 | 5/8" UNF | 115 | 200 | 4.5 |
| H1400R | 1.48 | 250 | 40 | 5/8" UNF | 115 | 270 | 6.2 |
| H2000R | 2 | 250 | 40 | 5/8" UNF | 115 | 350 | 7.9 |
| H3000R | 2.8 | 250 | 60 | 5/8" UNF | 115 | 400 | 9.8 |
| H4000R | 3.8 | 210 | 80 | 5/8" UNF | 170 | 335 | 14 |
Bladder Type Accumulators - HTR Series
Technical Data:
- Maximum working pressure (PS): 250-210-150 bar
- Test Pressure (PT): PS x 1,43 / 1,3 / 1,5
- Body: made in painted carbon steel
- Standard nitrogen valve : ⅝” UNF
- Working temperature (TS): -20°C ÷ +80°C
- Standard bladder: can be used with mineral oils and non corrosive fluids
- Installation: horizontal / vertical (nitrogen valve upward)
- Inside and outside epoxy painted as per standard FOX procedure or as project specification
- Internal lining in different materials
- Bladders in HNBR, EPDM, FPM
- Connection with flange SAE 3000 – SAE 6000, ANSI B16.5 or UNI/DIN
- Special connection on request
- LT series for temperature of – 40°C
- S series for separator of fluid
- Execution 310 Bar
Product Codes of HTR Accumulators:
| Code | Volume (Lt.) | Max. Pressure (bar) | Max. Flow (L/min.) | Gas Connection | Diameter (mm.) | Height (mm.) | Weight (kg.) |
|---|---|---|---|---|---|---|---|
| HTR1.5 | 1.5 | 250 | 40 | 5/8" UNF | 115 | 280 | 6.6 |
| HTR2.5 | 2.5 | 250 | 110 | 5/8" UNF | 115 | 483 | 10.3 |
| HTR3 | 3 | 210 | 260 | 5/8" UNF | 115 | 495 | 12.8 |
| HTR4.5 | 4.5 | 210 | 400 | 5/8" UNF | 170 | 395 | 14 |
| HTR6.5 | 6.5 | 210 | 350 | 5/8" UNF | 170 | 520 | 20 |
| HTR10 | 10 | 210 | 300 | 5/8" UNF | 170 | 760 | 31 |
| HTR10/2 | 10 | 150 | 630 | 5/8" UNF | 220 | 640 | 33 |
| HTR20 | 20 | 150 | 600 | 5/8" UNF | 220 | 845 | 59 |
| HTR35 | 35 | 150 | 540 | 5/8" UNF | 220 | 1500 | 90 |
| HTR50 | 50 | 150 | 500 | 5/8" UNF | 220 | 1990 | 121 |
Bladder Type Accumulators - HBR Series
Technical Data:
- Maximum working pressure (PS): 350 bar
- Test Pressure (PT): PS x 1,43 / 1,3 / 1,5
- Body: forged steel, sand and painted
- Standard nitrogen valve : ⅝” UNF
- Working temperature (TS): -20°C ÷ +80°C
- Standard bladder: can be used with mineral
- Inside and outside epoxy painted as per standard FOX procedure or as project specification
- Internal lining in different materials
- Bladders in HNBR, EPDM, FPM
- Connection with flange SAE 3000 – SAE 6000, ANSI B16.5 or UNI/DIN
- Special connection on request
- Execution with nitrogen/poppet valve in inox
- Accumulators technically and dimensionally interchangeable with other brands of same type
Product Codes of HBR Accumulators:
| Code | Volume (Lt.) | Max. Pressure (bar) | Max. Flow (L/min.) | Gas Connection | Diameter (mm.) | Height (mm.) | Weight (kg.) |
|---|---|---|---|---|---|---|---|
| HBR4 | 4 | 350 | 400 | 5/8" UNF | 168.3 | 350 | 16 |
| HBR6 | 6 | 350 | 350 | 5/8" UNF | 168.3 | 480 | 19.5 |
| HBR10 | 10 | 350 | 300 | 5/8" UNF | 168.3 | 735 | 36 |
| HBR20 | 18.5 | 350 | 600 | 5/8" UNF | 223 | 850 | 53 |
| HBR35 | 33.5 | 350 | 540 | 5/8" UNF | 223 | 1400 | 84 |
| HBR50 | 49 | 350 | 500 | 5/8" UNF | 223 | 1990 | 115 |
Bladder Type Accumulators - HB Series
Technical Data:
- Maximum working pressure (PS): 350-480-690 ba
- Test Pressure (PT): PS x 1,43 / 1,3 / 1,5
- Body: forged steel, sand and painted
- Standard nitrogen valve : ⅝” UNF
- Working temperature (TS): -20°C ÷ +80°C
- Standard bladder: can be used with mineral oils and non corrosive fluids
- Installation: horizontal / vertical (nitrogen valve upward)
- Inside and outside epoxy painted as per standard FOX procedure or as project specification
- Internal lining in different materials
- Bladders in HNBR, EPDM, FPM
- Connection with flange SAE 3000 – SAE 6000, ANSI B16.5 or UNI/DIN
- Special connection on request
- LT series for temperature of – 40°C
- S series for separator of fluid
- Execution 310 Bar
Product Codes of HB Accumulators:
| Code | Volume (Lt.) | Max. Pressure (bar) | Max. Flow (L/min.) | Gas Connection | Diameter (mm.) | Height (mm.) | Weight (kg.) |
|---|---|---|---|---|---|---|---|
| HB1 | 1 | 350 | 220 | 5/8" UNF | 114 | 295 | 4.5 |
| HB1.5 | 1.5 | 350 | 220 | 5/8" UNF | 114 | 357 | 5.5 |
| HB2.5 | 2.5 | 350 | 220 | 5/8" UNF | 114 | 520 | 12 |
| HB4.5 | 4 | 350 | 400 | 5/8" UNF | 168 | 410 | 16 |
| HB6 | 6 | 350 | 350 | 5/8" UNF | 168 | 505 | 19.5 |
| HB10 | 10 | 350 | 300 | 5/8" UNF | 168 | 775 | 36 |
| HB10/2 | 10 | 350 | 630 | 5/8" UNF | 223 | 550 | 48 |
| HB20 | 18.5 | 350 | 600 | 5/8" UNF | 223 | 870 | 53 |
| HB25 | 24.9 | 350 | 570 | 5/8" UNF | 223 | 1030 | 62 |
| HB35 | 33.5 | 350 | 540 | 5/8" UNF | 223 | 1400 | 84 |
| HB50 | 49 | 350 | 500 | 5/8" UNF | 223 | 1900 | 115 |